Honeywell Air Conditioner 800 Uživatelský manuál stáhnout pdf

USER MANUAL

Put Bar Code Here

66-2069-02

Honeywell Model 700/800 Signal

Processor and Viewing Head

APPLICATION

The Honeywell Model 700ACSP and Model 700DCSP signal

processors are single-channel, fail safe, flame monitoring

systems when used In conjunction with the S70X/S80X

viewing heads. They offer easy setup, excellent discrimination,

and high reliability.

FEATURES

Viewing heads are interchangeable between the two signal

processor models. Any viewing head in the two families will

work with any of the signal processors.

Two signal processor models are available:

• Model 700ACSP Universal 85-265 VAC powered, plus

24VDC backup.

• Model 700DCSP 22-26VDC powered, plus 24VDC

backup.

The two Model 700 signal processors are similar, with 12

push-buttons, a two-digit numeric display, and four LED status

indicators for operator interface. The only difference between

the two is that one accepts AC power and the other accepts

DC power. Both models also accept 24VDC backup power.

Most of the signal processor connections are made through

Phoenix plug-in connectors. Communication connections are

made through modular phone jacks located at the top of the

signal processors (Fig. 8).

Both signal processor models mount on a standard 35 mm

DIN rail. They snap into place and may be released from the

rail using a flat screwdriver.

There are two types of viewing heads—IR/flicker-sensitive and

UV-sensitive—with various features offered resulting in ten

different models. See Table 1 on page 2 for details.

The S702 and S706 viewing head housings are larger in

diameter than the S80X series, are made of aluminum, and

are secured with over-center latches to their mounting blocks

(Fig. 9). In contrast, the S802 and S806 viewing head

housings are smaller in diameter and are made of stainless

steel (Fig. 10). An 800 series viewing head is secured in its

mounting block by a friction twist-lock.

The IR/flicker sensitive viewing heads have a high-pass filter

that passes flicker frequencies above 33 Hz. Some models

have a built-in high pass filter that only passes frequencies

above 155 Hz. The high frequency filter models are identified

by adding “HF” to the model number. The UV models respond

to the level of UV radiation—not UV flicker—so there is no

filter option.

Contents

Application ....................................................................... 1

Features ........................................................................... 1

Specifications ................................................................... 2

Approvals ......................................................................... 3

Installation ........................................................................ 3

Operation ......................................................................... 10

Modbus Communication .................................................. 14

Troubleshooting ................................................................ 17

Maintenance .................................................................... 17

Safety Manual: 700 Signal Processor .............................. 33

Safety Manual: S70X & 80X Viewing Head ..................... 36

1 2 3 4 5 6 ... 39 40

Shrnutí obsahu

Strany 1 - Processor and Viewing Head

USER MANUALPut Bar Code Here66-2069-02Honeywell Model 700/800 Signal Processor and Viewing HeadAPPLICATIONThe Honeywell Model 700ACSP and Model 700DCS

Strany 2 - SPECIFICATIONS

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 10Vortex coolers (M3204, M3208, M3210, M4025) - Used with air cooling canister. Co

Strany 3 - INSTALLATION

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD11 66-2069—02Self-CheckingThe self-check circuitry guards against internal component failure.

Strany 4 - FOR INDICATOR OR

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 12INCREASE, DECREASE and STORE buttons (range of 00 to 29).• LOAD FACTORY DEFAULTS

Strany 5

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD13 66-2069—02is live. Adjustments will cause the Flame Relay to de-energize immediately, igno

Strany 6 - S702PF, S702HFPF OR S706PF

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 14the computed ratio, for example, “AC” and “75.” Press either the ACCEPT RATIO or

Strany 7 - Cable Preparation

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD15 66-2069—02using key sequence below at the front panel of the 700 as follows:1. Press and h

Strany 8 - Indicators

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 16 Fig. 7. Typical Communication Wiring and Recommended Addressing. NOTE: Refer to

Strany 9 - ACCESSORIES

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD17 66-2069—02TROUBLESHOOTINGLockout or Faulty VH IndicationIf the viewing head produces any p

Strany 10 - OPERATION

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 18Fig. 9. Models S702 and S706 Viewing Heads.Fig. 10. Models S802 and S806 Viewing

Strany 11 - Orificing

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD19 66-2069—02Fig. 11. Model 700DCSP Signal Processor. APPROVEDM34584+26PWR5-1/2(139)2-29/32 (

Strany 12 - Setting the Viewing Head Gain

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 21. All models include Electronic self-check.2. Flicker Frequency filter settings

Strany 13 - Automatic Setup of Setpoints

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 20Fig. 12. Model 700ACSP Signal Processor.APPROVEDM348515-1/2(139)2-29/32 (74)MODE

Strany 14 - MODBUS COMMUNICATION

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD21 66-2069—02 Fig. 13. Viewing Head Mounting Example. Fig. 14. Viewing Head Mounting Example.

Strany 15 - Modbus RTU Function Supported

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 22 Fig. 15. IR Viewing Head Location Fig. 16. UV Viewing Head LocationDETECTOR IN

Strany 16 - 66-2069—02 16

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD23 66-2069—02 Fig. 17. Opposed Fired Viewing Head SightingVIEWING HEADBURNER NOZZLE NO. 1NO.

Strany 17 - MAINTENANCE

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 24 Fig. 18. Flow Chart 1 - Setting Factory Defaults. IS THE PANEL LOCKED?LOAD FACT

Strany 18 - 21/64 (8)

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD25 66-2069—02Fig. 19. Flow Chart 2 - Auto Setup Page 1. IS THE PANEL LOCKED?IS THE AUTO SET L

Strany 19 - 19 66-2069—02

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 26 Fig. 20. Flow Chart 3 - Auto Setup Page 2. IS THE AUTO SETUP RATIO ACCEPTABLE?

Strany 20 - MODEL 700AC

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD27 66-2069—02Fig. 21. Flow Chart 4: Auto Setup Page 3.IS THE AUTO SETUP RATIO UNACCEPTABLE? R

Strany 21 - Mounting Examples

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 28 Fig. 22. Flow Chart 5: Manual Flame On Setup. IS THE PANEL LOCKED?RELAY ON SETP

Strany 22 - 66-2069—02 22

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD29 66-2069—02Fig. 23. Flow Chart 6: Manual Flame Off Setup.IS THE PANEL LOCKED?IS THE AUTO SE

Strany 23 - 23 66-2069—02

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD3 66-2069—02APPROVALSS70X/S80X Viewing Heads (Connector series and Pipe fit series [PF])CSA f

Strany 24 - 66-2069—02 24

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 30Fig. 24. Flow Chart 7: Flame Failure Response Time (FFRT) Setup. IS THE PANEL LO

Strany 25 - 25 66-2069—02

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD31 66-2069—02Fig. 25. Flow Chart 8: 0-20/4-20mA Analog Output Setup.IS THE PANEL LOCKED?0-20

Strany 26 - (CONTINUED)

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 32Fig. 26. Flow Chart 9: Viewing Head Gain Setting. IS THE PANEL LOCKED?DISPLAY SH

Strany 27 - 27 66-2069—02

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD33 66-2069—02SAFETY MANUAL: 700 SIGNAL PROCESSOR700ACSP, 700DCSP Product DeclarationFIT FOR U

Strany 28 - 66-2069—02 28

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 34As an added safety feature, the coil of the Flame Relay is wired in series with

Strany 29 - 29 66-2069—02

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD35 66-2069—02700AC or 700DC Signal Processor Proof Test ProcedureEquipment• Powered 700AC or

Strany 30 - 66-2069—02 30

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 36SAFETY MANUAL: S70X & 80X VIEWING HEADS702, S706, S802, AND S806 Product Dec

Strany 31 - (0-20/4-20 mA)

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD37 66-2069—02Safety Function of the S702, S706, S802, and S806The S702, S706, S802, and S806

Strany 32 - SETTING VIEWING HEAD GAIN

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 38a. Increase the gain and store the setting. Ensure the flamecount increased.b. D

Strany 33 - Safety Function of the 700

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD39 66-2069—02

Strany 34 - Proof Test Interval

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 4Fig. 1. Model 700ACSP Signal Processor Wiring.APPROVEDAC INGROUNDTO VIEWINGHEAD24

Strany 35 - Product Decommissioning

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEADAutomation and Control SolutionsHoneywell International Inc.1985 Douglas Drive NorthGolden Va

Strany 36 - S702, S706, S802, AND S806

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD5 66-2069—02Fig. 2. Model 700DCSP Signal Processor Wiring.++26VDCGND.4A1A 1A.125 ALIMM34282AP

Strany 37 - Test Interval

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 6Viewing Head Connector and WiringViewing heads are wired to the appropriate termi

Strany 38

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD7 66-2069—02Fig. 4. Model 700/800 Viewing Head Cable Connections. Cable PreparationNOTE: This

Strany 39 - 39 66-2069—02

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD66-2069—02 8 Fig. 6. ASSY786 Viewing Head Plug Assembly with C330S.Protecting the Viewing Hea

Strany 40 - Golden Valley, MN 55422

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD9 66-2069—02position has been decided. A continuous flow of air must be maintained in order t

Komentáře k této Příručce

Žádné komentáře

Honeywell Air Conditioner 800 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Měření, testování a kontrola Honeywell Air Conditioner 800. Honeywell Air Conditioner 800 User's Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Honeywell Air Conditioner 800