Honeywell RPLS731B Uživatelský manuál stáhnout pdf

RPLS730B/RPLS731B 1/6

RPLS730B/RPLS731B

Installation and User Guide

Programmable Wall Switch

The RPLS730B/RPLS731B programmable wall switch has been

designed to control lightings and motors:

NOTE: This switch cannot be used if there are not at least 2 white

wires joined by a connector inside the electrical box.

 Cut power at the circuit breaker to avoid electric shock.

 Remove the existing switch.

 Install the new switch as shown in the diagram below.

 Apply power at the circuit breaker.

 Pry the switch door open from the

bottom using a small screwdriver.

 Ensure the ON/OFF selector is set

to ON.

 Reset the switch using a paper clip.

0:00 and MO will flash.

If the display is blank:

• Ensure the ON/OFF selector is properly engaged in the ON posi-

tion. Push it to the right using a small screwdriver.

NOTE: The switch displays the time in 24-hour format by default or

following a reset.

 To change to 12-hour format (or vice versa), proceed as follows:

a) Press one of the control buttons to ensure the MAN or

AUTO indicator is displayed.

b) Press the MIN and HOUR buttons simultaneously and brief-

tly (0:00 display = 24-hour, 12:00 display = 12-hour ).

 Set the time using the HOUR and MIN buttons. If you have

selected the 12-hour format, ensure that PM appears on the

screen when an afternoon time is displayed.

 Set the day by using the DAY button.

 Press one of the control buttons or close the switch door to

return to normal operation.

The programmable switch has 2 operating modes: manual (MAN)

and automatic (AUTO).

To switch mode, press the switch door for 3

seconds.

Manual Mode

The programmable switch operates as a regular

switch. Briefly press the switch door to turn the lights

On or Off. The mode (MAN) and state (ON or OFF)

are displayed.

Automatic Mode

The programmable switch follows the programmed

schedule. The mode (AUTO), state (ON or OFF)

and current program number are displayed.

To temporarily override the programmed schedule,

briefly press the switch door. The new state

(ON or OFF) will flash to

show that this state is temporary. The override remains in effect until

you press the switch door again or until the beginning of the next

program.

You can set up to 7 programs. To set a program, you need to enter its

start time (ON) and its end time (OFF).

 Pry the switch door open using a small screwdriver.

 Press the PGM button to display a program and

its On or Off time. For example, when you first

press PGM, program number 1 (P1) and its On

time (ON) will appear. -:-- will appear instead

of the time if the program is not set (inactive).

 Press the DAY button to select the day to which

you want to apply the program.

NOTE: If you want to apply the program to

every day of the week, press DAY until all the

days are displayed. (This still counts as 1 program, not 7)



Applications

Load type Maximum load Examples

Resistive load

2400 W

(20 A @ 120 V)

• incandescent lights

• halogen lights

• block heater

Inductive load

2400 W

(20 A @ 120 V)

• fluorescent lights

• compact fluorescent lights (CFL)

• sodium lamps

• electronic ballasts

Motor 1 hp

• pool filter pumps

• fans



Installation



Power-On

120 VAC

(line)

white (neutral)

black (line)

blue (load)

Load

Control (4)

Reset

On/Off

selector



Setting the Clock



Selecting the Operating Mode



Programming

69-2457EFS-01_400-033-005-A (TI033_RPLS730B) USA print at 90%.book Page 1 Tuesday, May 18, 2010 10:38 AM

1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Installation and User Guide

RPLS730B/RPLS731B 1/6RPLS730B/RPLS731BInstallation and User GuideProgrammable Wall SwitchThe RPLS730B/RPLS731B programmable wall switch has beendesign

Strany 2 - Customer Assistance

RPLS730B/RPLS731B 2/6 Press the HOUR and MIN buttons to set the ON time (time when you want the lights to turn on). If you have selected the 12-hour

Strany 3

RPLS730B/RPLS731B 3/6RPLS730B/RPLS731BMode d’installation et d’emploiInterrupteur mural programmableL’interrupteur mural programmable RPLS730B/RPLS731

Strany 4 - Service à la clientèle

RPLS730B/RPLS731B 4/6 Appuyer sur la touche PGM pour afficher un programme et l’heure du début (ON) du programme ou l’heure de la fin (OFF) du progra

Strany 5 - Guía de instalación y uso

RPLS730B/RPLS731B 5/6RPLS730B/RPLS731BGuía de instalación y usoInterruptor mural programableEl interruptor mural programable RPLS730B/RPLS731B se util

Strany 6 - Asistencia técnica

RPLS730B/RPLS731B Printed in USA / Imprimé aux É.-U. / Impreso en EE.UU. 2010-05-18 6/66 Presionar el botón PGM para visualizar u